Custom Cable Assemblies
Assembly examples by interface
A selection of custom cables that we and our production partners have built – sorted by interface. Each one was made for a specific application and is not listed in any catalogue in this form.
All examples
Industry
35 examples
Mini DisplayPort to USB A for panel mounting
Hybrid connection solution for simultaneous video output and high-speed data synchronisation.
- Mini DisplayPort plug – USB 3.0 A socket
- Panel-mount cable
- Optimum screening of cable and connector
DisplayPort to D-SUB
Connection cable for industrial monitors with low attenuation for latency-free industrial video.
- DisplayPort plug – D-SUB 15-pin socket
- Vibration-resistant thanks to screw locking
- Optimum screening of cable and connector
- Low attenuation
DisplayPort to DisplayPort with ferrites
Monitor connection cable with ferrites that ensure more stable image transmission.
- DisplayPort plug – DisplayPort plug
- 8K signal at 60 Hz
- Optimum screening of cable and connector
- Stable image transmission
DisplayPort to data connector
Connection solution for stable industrial signal transmission that enables control of older equipment and data synchronisation without delay.
- DisplayPort plug – 20-pin pin header connector
- Integrated converter
- RS232 serial interface
DisplayPort to two data connectors with ferrite
DisplayPort cable with ferrite that splits into two 6-pin pin header connectors.
- DisplayPort plug – 2× 6-pin pin header connector
- Optimum screening of cable and connector
- Board to wire
- Precision-made 24 AWG cable
USB Type-C with locking to USB A for panel mounting
Extension for the device front where there is hardly any space behind the panel.
- USB Type-C plug – USB 3.0 A socket
- Panel-mount cable
- USB-C angled at 90° with side screw locking
- Optimum screening of cable and connector
USB Type-C to USB Type E
Internal cable from the mainboard connector to the socket in the housing.
- USB Type-C plug – USB Type E plug
- Compact internal enclosure wiring
- High data rates
- Secure mechanical connection
USB Micro-B with locking to USB A
Camera cable for moving axes, with screw locking on the Micro-B plug.
- USB 3.0 Micro-B plug – USB 3.0 A plug
- Robust connection for motion control
- Suitable for drag chains
- Optimum screening of cable and connector
Barrel connector to USB A for panel mounting
Panel-mount cable for powering industrial devices, from a barrel connector to a USB-A socket.
- Barrel connector – USB 2.0 A socket
- Stable 5 V / 12 V charging
- Panel-mount cable
- Power supply for industrial devices
Multi-pin interface to DC socket, 4-pin Dupont and USB A for enclosure mounting
A multi-pin interface branches out to a DC socket, a 4-pin Dupont connector and a USB-A socket for enclosure mounting.
- Multi-pin interface connector – DC socket, 4-pin Dupont connector, USB 3.0 A socket
- USB 3.0 Type-A socket with threaded housing for panel mounting
- UART connection for stable 3.3 V TTL signal processing
D-SUB to USB A for panel mounting
Panel-mount cable from a 9-pin D-SUB socket to a USB-A socket, with FTDI chipset.
- D-SUB 9-pin socket – USB 3.0 A socket
- Panel-mount cable
- Optimum screening of cable and connector
- FTDI chipset for maximum compatibility
USB Type-C with locking to USB Type-C with locking
USB-C cable with push-pull locking at both ends and a robust nylon braid.
- USB-C push-pull plug – USB-C push-pull plug
- Special push-pull locking mechanism
- Reversible USB-C connection
- Signal stability in harsh environments
- Robust nylon braid
USB Type-C with latching to USB Type-C with latching
USB-C cable to the USCAR standard with mechanical clip locking and poka-yoke coding.
- USB-C to USCAR standard – USB-C to USCAR standard
- High-speed data and Power Delivery
- Mechanical clip locking at both ends
- Poka-yoke coding
- Maximum EMC screening in continuous operation
USB Type-C with locking to USB Type-C
USB-C cable with screw locking at one end and a flexible PVC jacket.
- USB-C plug with screw locking – USB-C plug
- High-quality, flexible PVC jacket
- Single-screw locking mechanism
- Reliable data and signal transmission
- Optimum screening of cable and connector
RJ50 to 10-pin board connector with earthing clamps
Screened RJ50 cable to a 10-pin board connector, with earthing clamps.
- Screened RJ50 – 10-pin board connector
- Integrated mechanical strain relief with screw fixing
Rectangular socket housing to 2× M12 socket connectors
Y-splitter from a 6-pin socket housing to two angled M12 socket connectors.
- Rectangular 6-pin socket housing – M12 5-pin socket connector and M12 6-pin socket connector
- Efficient Y-splitter architecture
- Space-saving 90° angled connectors
- UL20549
M8 4-pin panel-mount socket to 4-pin pin header connector
Sensor connection through the enclosure wall, directly onto the board on the inside.
- M8 4-pin panel-mount socket – 4-pin pin header connector
- UL1061
M16 circular connector socket to SCSI plug
Control cable in corrugated conduit, from a 14-pin device connector to an angled M16 socket.
- M16 circular connector socket angled at 90° – SCSI 14-pin (HPCN) plug
- Integrated corrugated conduit protection
- Precise signal transmission
- UL2464
Multi-pin interface to multi-pin interface for enclosure mounting
Connection of two 9-pin multi-pin interfaces for enclosure mounting, with space-saving cable routing.
- 9-pin multi-pin interface – 9-pin multi-pin interface
- Space-saving and flexible cable routing
- Secure locking
Hirose DF13 to Hirose DF14 with earth connections
Crimp connection from Hirose DF13 to DF14, with ring terminals for earthing.
- Double-row Hirose DF13 crimp connector – single-row, ultra-low-profile Hirose DF14 crimp connector
- Firmly crimped ring terminals (earth lugs)
- Effective EMC protection
- Easy identification (multi-colour wiring)
Micro-coaxial connector to micro-coaxial connector
Cable with micro-coaxial connectors at 0.4 mm pitch for LVDS and eDP signals.
- Micro-coaxial connector – micro-coaxial connector, 0.4 mm pitch
- LVDS (Low-Voltage Differential Signaling)
- eDP (Embedded DisplayPort)
- Excellent signal integrity in high-speed transmission
- Protection against EMI/RFI
FFC connector to socket connector
Display cable from a 30-pin FFC connector to a double-row 30-pin socket connector, for LVDS.
- Single-row 30-pin FFC or crimp connector – double-row 30-pin socket connector
- Robust mechanical outer sheath
- Secure strain relief and labelling
- Stable LVDS data transmission to the LCD screen
JAE 40P to JAE 40P, exposed screen area
LVDS cable with two 40-pin JAE connectors and an exposed screen area.
- JAE 40-pin connector – JAE 40-pin connector
- High-speed data transmission and signal integrity
- UL20276 compliance (AWM Style 20276)
- Stable LVDS data transmission to the LCD screen
Pin header plug to pin header connector
Ribbon cable to the USB 3.0 standard, from an overmoulded 20-pin pin header plug to a 20-pin pin header connector.
- Overmoulded 20-pin pin header plug – 20-pin pin header connector
- Ribbon cable design
- USB 3.0 standard
- Black and blue colour scheme
M8 panel-mount socket for enclosure mounting to two pin header connectors
An 8-pin M8 panel-mount socket distributes signal and power to a 6-pin and a 2-pin JST housing.
- M8 8-pin circular connector – 1× 6-pin JST housing and 1× 2-pin JST housing
- Intelligent separation of signal and power
- Flexible and space-saving single-core routing
- Dust and water protection with front mounting
Pre-assembled cable harness (Y-cable/adapter cable)
Y-cable from an M16 panel-mount plug and an M12 panel-mount socket to two 5-pin pin header connectors.
- M16 5-pin panel-mount plug + M12 8-pin panel-mount socket – 2× 5-pin pin header connector
- Parallel routing of data and control signals
- Clear labelling
OBD2 plug to OBD2 socket extension cable
Extension for the 16-pin OBD2 interface, with standardised full pin assignment.
- OBD2 16-pin plug – OBD2 16-pin socket
- Plug & play
- Flexible round cable construction
- Standardised full 16-pin assignment
Ring terminal to Molex Micro-Fit with PG cable gland
System cable from a ring terminal to a 2-pin Molex Micro-Fit housing, with a PG cable gland for the enclosure feed-through.
- Ring terminal (eyelet) – Molex Micro-Fit 3.0 2-pin receptacle housing
- Protection against mismating (polarisation)
- Pre-assembled system cable
- Industrial-grade certification (AWM 2517)
- Dust- and watertight enclosure feed-through
Adapter cable harness
Cable harness with ATX, SATA, Molex and PCIe connectors to ribbon cable connector, screw terminal block and flat connectors.
- ATX main power connector, SATA power connector, Molex connectors, EPS/PCIe, ribbon cable connector, screw terminal block, flat connectors
- Multifunctional hybrid construction
- Colour-coded cable harness
- Modular
- Integrated cable splices with heat-shrink tubing
Special cable harness with integrated power resistor and indicator light
Cable harness with a power resistor, green LED indicator, rectangular connector and ring terminals.
- 12-pin terminal block connector – 10-pin crimp connector, 4× ring terminal, green LED indicator, integrated power resistor
- Status monitoring
- Structured cable bundling
- Interface bridge
DC barrel connector to aviation-style circular connector
Power cable from a DC barrel connector to a 2-pin aviation-style circular connector with screw locking.
- DC barrel connector – 2-pin aviation-style circular connector
- Vibration-proof screw locking
- Robust metal housing
- Flexible and durable sheath
JST receptacle housing to two flat receptacles with ferrite and identification tag
Power cable from a 3-pin JST receptacle housing to two flat receptacles, with ferrite and identification tag.
- 3-pin JST receptacle housing – two flat receptacles
- Integrated EMI suppression
- Colour-coded cable routing
- UL11028
Flexible flat cable (FFC)
The cable plugs directly into ZIF (zero insertion force) or non-ZIF FPC/FFC connectors on circuit boards.
- UL certification AWM 20706
- Flexible
- Temperature-resistant up to 105 °C
SMPTE panel socket with flange to cable plug
SMPTE 304M connection from a flanged panel socket to a cable plug, with push-pull locking.
- SMPTE 304M flanged panel socket – SMPTE 304M cable plug
- Push-pull locking
- Worldwide broadcast standard
- SMPTE 304M / ST 311 standard
- Modular design for easy maintenance
SMPTE cable socket to cable plug
SMPTE 304M connection from cable socket to cable plug with push-pull locking and retrofit cable marking.
- SMPTE 304M cable socket – SMPTE 304M cable plug
- Push-pull locking
- Worldwide broadcast standard
- SMPTE 304M / ST 311 standard
- Modular design for easy maintenance
- Retrofit cable marking using heat-shrink tubing
Can’t find your cable?
The examples show only a selection. Send us a drawing, sample or requirement – we will check how your connection can be realised through our production network.
- Mon–Thu 08:00–17:00
- Fri 08:00–14:00
- +49 5201 85660-00
- info@ttl-network.de